What is a Locking Tuner and How You Are Probably Using it Wrong

Date Posted:18 May 2017 

              Just what is a locking tuner? Locking tuners are tuners which have a pin or retaining mechanism that locks the string in place and prevents your string from coming loose. These types of tuners are usually adjusted by tightening or loosening a knob on the back of the headstock. Something that a lot of people miss though is the fact that using locking tuners saves you from the trouble of having to wrap the string around the tuning posts. When you wrap strings around the post with a locking tuner, you will encounter some problems when bending a note or using your tremolo. This will cause the winding on the tuning posts to become slightly unwrapped. Once you unbend the string or return the tremolo to the zero position, the wrapping of the string on the post has now moved slightly. This will give you some tuning instability and may cause the pitch to change on the string. This is a common mistake which is still something that is not realized by a lot of people. So how do you use a locking tuner? We have provided a step by step instruction on how to utilize the locking tuner of your guitar.

 

Step 1: Remove the old string by loosening the locking tuner. (It will actually save you some time yourself from later adjustments by changing one string at a time.)

 

Step 2: Insert the new string through tailpiece/bridge or tremolo block and remember to pull the string all the way through.

 

Step 3: Make sure to line up the hole in the post with the string in order for the string to go straight through the tuner.  Make sure to pull the on the string with enough tension.

 

Step 4: Tighten the locking tuner plenty to ensure that the string will not slip out of the locking tuner.

 

Step 5: Tune up the new string using a tuner.

 

Step 6: Clip the new string approximately 1/8” from the hole


Leave a comment

Comments have to be approved before showing up