Author: Michael Back Date Posted:8 December 2021
Phantom power. It’s a term that is thrown around a lot and to the beginner musician or audio enthusiast, it’s hard to know what it really means. Phantom power is the term given to delivering DC (direct current) power through a microphone lead from an amplifier, mixer or audio interface. All Condenser Microphones require Phantom Power to function.
Phantom Power is a voltage that is sent through the microphone lead from the mixer, amplifier or audio interface. Historically, this voltage is between 1 and 52V, but the industry standard for modern microphones is 48V. Some microphones will have batteries installed that provide phantom power to the microphone, but the majority of condenser microphones on the market require phantom power from the mixer, interface or amplifier.
Phantom Power is essential for condenser microphones to function. Large-diaphragm condenser microphones and small diaphragm condenser microphones alike need power to function.
.jpg)
Phantom Power shouldn’t be used when using any other kind of microphone. It’s important to check the specifications of your microphone if you’re unsure. Phantom power should not be used on Dynamic or Ribbon microphones.
.png)
It’s also worth noting that phantom power should not be used on unbalanced cables. An example of an unbalance cable is a guitar lead. The reason for this is that typically microphone cables have 3 cores, 2 that send the signal and one that is a ground. If phantom power is sent through an unbalanced cable, there’s no grounding for the power.
Yes, you read that correctly. Phantom Power has the capacity to damage your microphones or other equipment if it’s used incorrectly. Sending Phantom Power to a ribbon microphone can cause the microphone to be damaged irreparably. If you send phantom power to a bit of equipment that is already powered, such as a Keyboard, it can damage the circuitry within the keyboard.
Phantom power typically does not damage dynamic microphones, but it’s best practice to leave it turned off when using anything other than a condenser microphone.
Most mixers and amplifiers will have a button or switch on them that is labelled “48V’ or “Phantom Power”. On a mixer with multiple channels, this will typically be towards the top of the channel strip. Otherwise it’ll be next to or near the microphone cable input.
.jpg)
On interfaces, the phantom power button may be on the front of the interface, but it’s quite common to need to use the software included with the interface to control Phantom Power.
USB Condenser microphones don’t require phantom power, as they plug directly into a USB port on your computer, completely circumventing the need for an amp, mixer or interface. The USB microphones use an interface that’s built directly into the microphone, which supplies the necessary power to the microphone.
.png)
The Name “Phantom Power” has been around for such a long time, it’s hard to pinpoint its exact origin. Condenser style microphones have been around since the mid 1900s, and in that time, the power was supplied to the microphone from an external power supply. With the introduction of Phantom Power, suddenly the microphone was powered without any visible supply. As the power supply was not visible, it was dubbed “Phantom” power, as the origin of the power wasn’t visible!
Thanks for reading this blog! to give you even more great content, check out our pages.
I hope this article has helped. if you need any assistance please email:
sales@artistguitars.com.au or call us on 1300 489 816
© Artist Guitars 2021
New Zealand
United Kingdom
