Artist BullBucker Guitar Humbucker Pickup Bridge - Chrome Covered

About this Artist BullBucker Humbucker Pickup Bridge - Chrome Covered

Based on the popular JB model, this bridge pickup has a fairly high output and is very versatile. Great for everything from blues to heavy metal. Provides slammin' output with singing highs, aggressive harmonics, and can retain clear crisp cleans while being able to get real dirty. Pairs well with our BullBucker Neck Pickup.

Works especially well mahogany body guitars with rosewood fingerboards. They are wax potted and can be used as Split Coil Humbuckers which allows the humbucker to effectively become a single coil. All Artist Bullbucker humbuckers have four-conductor hookup wires and use the same standard wire colour code. 

Top Coil Polarity: North

Bottom Coil Polarity: South

North start: Black wire, taped with bare ground wire. (Also known as Inside Slug wire) 

North finish: White wire (outside slug wire)

South finish: Red wire (Outside screw wire)

South start: Yellow wire (Also known as Inside Screw wire) This is your Hot wire.

To use this as a standard humbucker in series configuration, the White & Red wires are soldered together and taped; Black is ground and Yellow is Hot Output.

If you want to coil-split, then attach the Red and White wires to the coil switch. This means that when coil splitting, Black and White are not involved because they are both grounded, which deactivates the North coil. 

Because this setup is the same on the Neck pickup, coil splitting both and using the middle position will not hum cancel, because they will both be using the south coil and will have the same polarity.

The Tech Features

Model: BULLBUCKERBC

Type: Bridge Pickup, Alnico V Bar

Colour: Chrome

Conductors: 4

DC resistance: 15.4K

Inductance Rating: 9.6H

Spacing: 52mm

(12935)